Product Description
| Model |
HT06-10T |
| Dimensions (mm) |
5000X1150X2800 |
| Wheel base (mm) |
1618 |
| Wheel tread(mm) |
840 |
| Min. ground clearance (mm) |
175 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
1800 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
2800 |
| Digging parameters |
| Max. digging depth (mm) |
2400 |
| Dig unloading height (mm) |
2600 |
| Max. digging radius (mm) |
2500 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
3640 |
| Maximum digging force (kN) |
10 |
| Rotary Angle of excavator (°) |
120 |
| Loading parameters |
| Max. unloading height (mm) |
2000 |
| Max. unloading distance (mm) |
1000 |
| Bucket width (mm) |
1150 |
| Bucket capacity (m³) |
0.2 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
16 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
D1105-EF02 |
| Type |
lnline Direct lnject,4 strokes |
| Rate power (KW) |
18.2 |
| Rate speed (r/min) |
3000 |
| Cylinders-inside diameter |
3 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
SPECIAL USE |
| Tire |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Model |
HT08-12 |
| Dimensions (mm) |
5100*1350*2580 |
| Wheelbase (mm) |
1910 |
| wheel tread(mm) |
1100 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2500 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3000 |
| Digging parameters |
| Max. digging depth (mm) |
1500 |
| Dig unloading height (mm) |
1500 |
| Max. digging radius (mm) |
2000 |
| Bucket width (mm) |
350 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2600 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2200 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.4 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
28 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
825-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
20 |
| Hydraulic tank (L) |
20 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3000 |
| Model |
HT08-12T |
| Dimensions (mm) |
4400*1665*2550 |
| Wheelbase (mm) |
1960 |
| wheel tread(mm) |
1130 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3200 |
| Diggingparameters |
| Max. digging depth (mm) |
1450 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2600 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2300 |
| Max. unloading distance (mm) |
750 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.3 |
| Max. loading lifting height (mm) |
2800 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN25GB |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
10-16.5 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
25 |
| Hydraulic tank (L) |
25 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT10-20 |
| Dimensions (mm) |
5500*1750*2650 |
| Wheelbase (mm) |
2070 |
| wheel tread(mm) |
1475 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
3400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3500 |
| Diggingparameters |
| Max. digging depth (mm) |
2000 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2700 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.1 |
| max. digging height (mm) |
3300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2800 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1800 |
| Bucket capacity (m³) |
0.5 |
| Max. loading lifting height (mm) |
3300 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
20.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT15-26 |
| Dimensions (mm) |
5800*1850*2750 |
| Wheelbase (mm) |
2315 |
| wheel tread(mm) |
1500 |
| Min. ground clearance (mm) |
220 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
4800 |
| Max. speed (Km/h) |
26 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4000 |
| Digging parameters |
| Max. digging depth (mm) |
2700 |
| Dig unloading height (mm) |
2200 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
500 |
| Bucket capacity (m3) |
0.2 |
| max. digging height (mm) |
4200 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3300 |
| Max. unloading distance (mm) |
850 |
| Bucket width (mm) |
1900 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN27GBZ |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
58 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
23.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
40 |
| Hydraulic tank (L) |
40 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
450 |
| Model |
HT20-28 |
| Dimensions (mm) |
6200*1960*2800 |
| Wheelbase (mm) |
2550 |
| wheel tread(mm) |
1580 |
| Min. ground clearance (mm) |
290 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
5400 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
600 |
| Bucket capacity (m3) |
1 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
42 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2100 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 4102 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
76 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-102 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
600 |
| Model |
HT25-30 |
| Dimensions (mm) |
6500*2040*2800 |
| Wheel base (mm) |
2675 |
| Wheel tread(mm) |
1630 |
| Min. ground clearance (mm) |
280 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
6500 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
700 |
| Bucket capacity (m3) |
0.25 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2200 |
| Bucket capacity (m³) |
1.2 |
| Max. loading lifting height (mm) |
4300 |
| Max. breakout force (kN) |
42 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN48GBZ (OPTIONAL) |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
92 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-108 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
6200 |
| Model |
HT30-25 |
| Operating weight |
7200kg |
| Dimensions(L*W*H) |
7800×2300×3180mm |
| Wheel base |
2550mm |
| Min.ground clearance |
300mm |
| Bucket capacity |
1.1m3 |
| Breakout Force |
38kN |
| Loading lifting capacity |
2500kg |
| Bucket Dumping height |
3350mm |
| Bucket Dumping Distance |
062mm |
| Bucket Lifting Height |
4700mm |
| Backhoe capacity |
0.3m3 |
| Max.digging depth |
4250mm |
| Sing angle of excavator grab |
190° |
| Max. pulling force |
39kN |
| Engine |
| Model |
Yuchai |
| Rated Power |
85kw |
| No.of cylinder- Bore/Stroke |
4-108*120mm |
| Max. torque |
≥261.7N.m/1800/r/min |
| Displacement |
4.9L |
| Steering system |
| Model of steering system |
BZZ5-250 |
| Steering angle |
±36° |
| Mini turning radius |
5018mm |
| Pressure of the system |
16MPa |
| Axle |
| Manufacturer |
JINLITE |
| Main Transimmison type |
Double Reduction |
| Final reducer |
Single stage final reducer |
| T ransmission system |
| Torque converter |
JINLITE |
| Gearbox |
Fixed shaft power transmission |
| Gears |
F4/R4 |
| Max.Speed |
36km/h |
| Service Brake |
Air over Oil Caliper Brake; External Type:
Self-regulation; Self-balance |
| Parking Brake |
Manual disk brake |
| Tires |
4 |
| Size |
16/70-24 |
| Hydraulic System |
| Digging Power of Excavator Grab |
46.5kN |
| Digging Power of Dipper |
31kN |
| Model |
HT388 |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Coolingway--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine brand |
Yunnei (Optional) |
| Cooling type |
Water cooling |
| Rated power |
92 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
| Model |
HT765E-4T |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Cooling way--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine model |
YUNNEI YN48 (OPTIONAL) |
| Cooling type |
Water cooling |
| Rated power |
75 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Manufacturer |
YUNNEI (OPTIONAL) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
1. Immerse yourself in luxury with our elegantly designed, spacious cabin, outfitted with a plush luxury seat. The cabin features a hydraulic forward tilting function, ensuring that maintenance is not only straightforward but effortlessly convenient.
2. Designed for versatility, the top canopy of the cabin is ingeniously removable, facilitating seamless and efficient container deliveries.
3. Our streamlined, enlarged fuel tank is equipped with a tilting oil port, making refueling a breeze and ensuring you stay powered up with ease.
4. Experience unmatched durability with hydraulic components sourced from renowned brands, promising a long working life and exceptional, stable performance.
5. A large radiator is incorporated, perfect for operation in extremely hot climates, ensuring optimal performance no matter the conditions.
6. Our state-of-the-art hydraulic steering system offers unparalleled ease of control, enhancing maneuverability and precision.
The robust integral frame guarantees outstanding stability, making this machine particularly adept for demanding excavation tasks.
The excavating working device features a pivot center type design, combining lightweight construction with high strength for superior performance and reliability.
More Products
Xiamen HTMA Co., Ltd., established in 2007, is renowned for its expertise in manufacturing construction machinery, including wheel loaders, backhoe loaders, and excavators. Our subsidiary, Xiamen Mingyu New Energy Co., Ltd., specializes in forklifts. With our main office located in Xiamen and a branch factory in Shandong, we also distribute XGMA products, combining strengths for optimal synergy.
Our headquarters in Xiamen benefits from its strategic location in the southeast coastal special economic zone. This prime area attracts top-tier R&D talent, offering an exceptional platform for the advancement of our R&D, design, and marketing endeavors.
The Shandong factory is strategically established, taking into account the local natural resources, infrastructure, traffic conditions, labor costs, and policy environment. Our fully integrated production facility includes a casting welding workshop, component warehouse, assembly workshop, and adheres to rigorous quality standards.
As a seasoned manufacturer of construction machinery, our factory understands the resilience and demand of the traditional diesel market. We steadfastly continue our diesel production line, enhancing product performance and user experience to maintain a competitive edge in the market.
With the global shift in the construction machinery industry, new energy lithium technology is emerging as a key development trend. While preserving our strengths in diesel products, we are proactively investing in R&D to innovate and develop cutting-edge lithium energy solutions.
Embracing our traditional strengths, we are also deeply committed to the advancement of new energy lithium technology. We stay abreast of industry trends, expanding our research and development to debut a range of pioneering lithium power products.
Our R&D team has achieved significant milestones in new energy tech, including the independent development of a sophisticated battery management system that enhances safety, stability, and battery lifespan. Moreover, we optimize energy density and charging speeds, delivering a seamless and efficient user experience.
In vehicle design, we prioritize superior control and driving comfort. Our new energy models are at the forefront of the industry in terms of maneuverability and user comfort.
To adeptly navigate market dynamics, we are strategically pooling resources to bolster our competitive edge. By forging strong partnerships with supply chain enterprises, we collaboratively drive the growth of the new energy lithium-electric vehicle sector.
Looking ahead, our commitment to new energy investment and R&D remains unwavering. We will align with market and technology trends, consistently launching pioneering lithium power products. Concurrently, we will explore innovative business models and partnerships to enhance user service offerings.
Delivering top-tier, convenient services to our valued customers is our priority.
In summary, while upholding our diesel production strengths, we are eagerly transitioning into the new energy lithium era. With an open and innovative approach, we rise to market challenges, continually boosting our competitiveness and market influence.
Ultimately, Mingyu aspires to forge mutually beneficial collaborations with all partners!
We warmly invite you to explore China and visit Mingyu!
Our Advantages
Certifications
Exhibition
Packaging & Shipping
FAQ
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
Audited Supplier 
){kind=link}