Product Description
| Model |
HT06-10T |
| Dimensions (mm) |
5000X1150X2800 |
| Wheel base (mm) |
1618 |
| Wheel tread(mm) |
840 |
| Min. ground clearance (mm) |
175 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
1800 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
2800 |
| Digging parameters |
| Max. digging depth (mm) |
2400 |
| Dig unloading height (mm) |
2600 |
| Max. digging radius (mm) |
2500 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
3640 |
| Maximum digging force (kN) |
10 |
| Rotary Angle of excavator (°) |
120 |
| Loading parameters |
| Max. unloading height (mm) |
2000 |
| Max. unloading distance (mm) |
1000 |
| Bucket width (mm) |
1150 |
| Bucket capacity (m³) |
0.2 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
16 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
D1105-EF02 |
| Type |
lnline Direct lnject,4 strokes |
| Rate power (KW) |
18.2 |
| Rate speed (r/min) |
3000 |
| Cylinders-inside diameter |
3 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
SPECIAL USE |
| Tire |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Model |
HT08-12 |
| Dimensions (mm) |
5100*1350*2580 |
| Wheelbase (mm) |
1910 |
| wheel tread(mm) |
1100 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2500 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3000 |
| Digging parameters |
| Max. digging depth (mm) |
1500 |
| Dig unloading height (mm) |
1500 |
| Max. digging radius (mm) |
2000 |
| Bucket width (mm) |
350 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2600 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2200 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.4 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
28 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
825-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
20 |
| Hydraulic tank (L) |
20 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3000 |
| Model |
HT08-12T |
| Dimensions (mm) |
4400*1665*2550 |
| Wheelbase (mm) |
1960 |
| wheel tread(mm) |
1130 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3200 |
| Diggingparameters |
| Max. digging depth (mm) |
1450 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2600 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2300 |
| Max. unloading distance (mm) |
750 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.3 |
| Max. loading lifting height (mm) |
2800 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN25GB |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
10-16.5 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
25 |
| Hydraulic tank (L) |
25 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT10-20 |
| Dimensions (mm) |
5500*1750*2650 |
| Wheelbase (mm) |
2070 |
| wheel tread(mm) |
1475 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
3400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3500 |
| Diggingparameters |
| Max. digging depth (mm) |
2000 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2700 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.1 |
| max. digging height (mm) |
3300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2800 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1800 |
| Bucket capacity (m³) |
0.5 |
| Max. loading lifting height (mm) |
3300 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
20.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT15-26 |
| Dimensions (mm) |
5800*1850*2750 |
| Wheelbase (mm) |
2315 |
| wheel tread(mm) |
1500 |
| Min. ground clearance (mm) |
220 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
4800 |
| Max. speed (Km/h) |
26 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4000 |
| Digging parameters |
| Max. digging depth (mm) |
2700 |
| Dig unloading height (mm) |
2200 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
500 |
| Bucket capacity (m3) |
0.2 |
| max. digging height (mm) |
4200 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3300 |
| Max. unloading distance (mm) |
850 |
| Bucket width (mm) |
1900 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN27GBZ |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
58 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
23.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
40 |
| Hydraulic tank (L) |
40 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
450 |
| Model |
HT20-28 |
| Dimensions (mm) |
6200*1960*2800 |
| Wheelbase (mm) |
2550 |
| wheel tread(mm) |
1580 |
| Min. ground clearance (mm) |
290 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
5400 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
600 |
| Bucket capacity (m3) |
1 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
42 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2100 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 4102 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
76 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-102 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
600 |
| Model |
HT25-30 |
| Dimensions (mm) |
6500*2040*2800 |
| Wheel base (mm) |
2675 |
| Wheel tread(mm) |
1630 |
| Min. ground clearance (mm) |
280 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
6500 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
700 |
| Bucket capacity (m3) |
0.25 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2200 |
| Bucket capacity (m³) |
1.2 |
| Max. loading lifting height (mm) |
4300 |
| Max. breakout force (kN) |
42 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN48GBZ (OPTIONAL) |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
92 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-108 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
6200 |
| Model |
HT30-25 |
| Operating weight |
7200kg |
| Dimensions(L*W*H) |
7800×2300×3180mm |
| Wheel base |
2550mm |
| Min.ground clearance |
300mm |
| Bucket capacity |
1.1m3 |
| Breakout Force |
38kN |
| Loading lifting capacity |
2500kg |
| Bucket Dumping height |
3350mm |
| Bucket Dumping Distance |
062mm |
| Bucket Lifting Height |
4700mm |
| Backhoe capacity |
0.3m3 |
| Max.digging depth |
4250mm |
| Sing angle of excavator grab |
190° |
| Max. pulling force |
39kN |
| Engine |
| Model |
Yuchai |
| Rated Power |
85kw |
| No.of cylinder- Bore/Stroke |
4-108*120mm |
| Max. torque |
≥261.7N.m/1800/r/min |
| Displacement |
4.9L |
| Steering system |
| Model of steering system |
BZZ5-250 |
| Steering angle |
±36° |
| Mini turning radius |
5018mm |
| Pressure of the system |
16MPa |
| Axle |
| Manufacturer |
JINLITE |
| Main Transimmison type |
Double Reduction |
| Final reducer |
Single stage final reducer |
| T ransmission system |
| Torque converter |
JINLITE |
| Gearbox |
Fixed shaft power transmission |
| Gears |
F4/R4 |
| Max.Speed |
36km/h |
| Service Brake |
Air over Oil Caliper Brake; External Type:
Self-regulation; Self-balance |
| Parking Brake |
Manual disk brake |
| Tires |
4 |
| Size |
16/70-24 |
| Hydraulic System |
| Digging Power of Excavator Grab |
46.5kN |
| Digging Power of Dipper |
31kN |
| Model |
HT388 |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Coolingway--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine brand |
Yunnei (Optional) |
| Cooling type |
Water cooling |
| Rated power |
92 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
| Model |
HT765E-4T |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Cooling way--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine model |
YUNNEI YN48 (OPTIONAL) |
| Cooling type |
Water cooling |
| Rated power |
75 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Manufacturer |
YUNNEI (OPTIONAL) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
1. Experience the pinnacle of comfort in our luxury enlarged cabin, featuring an opulent seat for unparalleled comfort. The cabin boasts a hydraulic forward tilting function, ensuring easy maintenance and effortless access.
2. Innovatively designed, the top canopy of the cabin is removable, allowing for convenient container delivery, making transportation a breeze.
3. Our streamlined, enlarged fuel tank comes with a tilting oil port, facilitating easy and efficient refilling to keep you on the move without hassle.
4. Equipped with renowned brand hydraulic components, this machine promises long-lasting durability and stable performance to withstand rigorous operations.
5. The large radiator is meticulously engineered to perform exceptionally well in very hot areas, ensuring reliable cooling under extreme conditions.
6. The hydraulic steering system is designed for effortless control, providing precision handling and maneuverability in demanding work environments.
Built with an integral frame, the entire machine offers excellent stability, making it exceptionally well-suited for demanding excavation tasks.
The excavating working device is engineered with a pivot center type design, offering a lightweight yet high-strength construction that delivers exceptional performance and reliability.
More Products
Established in 2007, Xiamen HTMA Co., Ltd. is a leading manufacturer specializing in construction machinery equipment, including wheel loaders, backhoe loaders, and excavators. Our subsidiary, Xiamen MINGYU New Energy Co., Ltd., excels in producing forklifts. With our headquarters in Xiamen and a branched factory in Shandong, we also distribute XGMA products, leveraging mutual advantages for optimal offerings.
Our headquarters in Xiamen benefit from the unique advantages of the southeast coastal special economic zone. Xiamen's vibrant environment attracts top-tier R&D talent, providing an exceptional platform for innovative R&D design and strategic marketing.
Strategically located in Shandong, our factory benefits from optimal natural conditions, resource distribution, traffic access, labor cost efficiencies, and a supportive policy environment. Our Shandong factory embraces production integration, featuring a casting welding workshop, component warehouse, assembly workshop, and rigorous debugging standards.
As seasoned construction machinery manufacturers, we understand the stability and demand within the traditional diesel market. Committed to excellence, we consistently refine product performance, enhance user satisfaction, and maintain our leadership in a highly competitive market.
With the global construction machinery industry evolving, new energy lithium technology is pivotal. While sustaining our traditional diesel strengths, we are proactively capturing market shifts by investing heavily in R&D, spearheading innovative new energy lithium product development.
While embracing our traditional strengths, we recognize the critical importance of new energy lithium products. We align with contemporary trends, strategically advance into the new energy sector, bolster R&D, and unveil a pioneering lineup of new energy lithium power products.
Our R&D team has achieved significant breakthroughs in new energy technology. We have developed a sophisticated battery management system that enhances battery safety, stability, and longevity. Concurrently, we optimize energy density and charging speed, ensuring a seamless and efficient charging experience for users.
In vehicle design, we focus on enhancing control performance and driving experience. Our new energy models are industry leaders in handling and comfort, setting new standards in the sector.
To adeptly navigate market dynamics, we strategically integrate resources and boost competitiveness. We've forged strong partnerships with key enterprises across the industrial chain, collaboratively advancing the new energy lithium-electric vehicle industry.
Looking ahead, we are committed to amplifying our investment in new energy R&D, aligning with market trends and technological advancements. We aim to continuously introduce cutting-edge new energy lithium power products, while exploring innovative business models and partnerships to deliver exceptional services.
We are dedicated to providing high-quality, convenient services.
Ultimately, while preserving our traditional diesel product strengths, we enthusiastically embrace the new energy lithium era. With an open, innovative approach, we confront market challenges, continuously enhancing our competitiveness and influence.
In conclusion, MINGYU eagerly anticipates collaborations for mutually beneficial partnerships.
WELCOME TO CHINA! VISIT MINGYU AND EXPERIENCE OUR INNOVATIONS FIRSTHAND!
Our Advantages
Certifications
Exhibition
Packaging & Shipping
FAQ
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
Audited Supplier 
){kind=link}