Product Description
| Model |
HT06-10T |
| Dimensions (mm) |
5000X1150X2800 |
| Wheel base (mm) |
1618 |
| Wheel tread(mm) |
840 |
| Min. ground clearance (mm) |
175 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
1800 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
2800 |
| Digging parameters |
| Max. digging depth (mm) |
2400 |
| Dig unloading height (mm) |
2600 |
| Max. digging radius (mm) |
2500 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
3640 |
| Maximum digging force (kN) |
10 |
| Rotary Angle of excavator (°) |
120 |
| Loading parameters |
| Max. unloading height (mm) |
2000 |
| Max. unloading distance (mm) |
1000 |
| Bucket width (mm) |
1150 |
| Bucket capacity (m³) |
0.2 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
16 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
D1105-EF02 |
| Type |
lnline Direct lnject,4 strokes |
| Rate power (KW) |
18.2 |
| Rate speed (r/min) |
3000 |
| Cylinders-inside diameter |
3 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
SPECIAL USE |
| Tire |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Model |
HT08-12 |
| Dimensions (mm) |
5100*1350*2580 |
| Wheelbase (mm) |
1910 |
| wheel tread(mm) |
1100 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2500 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3000 |
| Digging parameters |
| Max. digging depth (mm) |
1500 |
| Dig unloading height (mm) |
1500 |
| Max. digging radius (mm) |
2000 |
| Bucket width (mm) |
350 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2600 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2200 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.4 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
28 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
825-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
20 |
| Hydraulic tank (L) |
20 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3000 |
| Model |
HT08-12T |
| Dimensions (mm) |
4400*1665*2550 |
| Wheelbase (mm) |
1960 |
| wheel tread(mm) |
1130 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3200 |
| Diggingparameters |
| Max. digging depth (mm) |
1450 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2600 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2300 |
| Max. unloading distance (mm) |
750 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.3 |
| Max. loading lifting height (mm) |
2800 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN25GB |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
10-16.5 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
25 |
| Hydraulic tank (L) |
25 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT10-20 |
| Dimensions (mm) |
5500*1750*2650 |
| Wheelbase (mm) |
2070 |
| wheel tread(mm) |
1475 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
3400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3500 |
| Diggingparameters |
| Max. digging depth (mm) |
2000 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2700 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.1 |
| max. digging height (mm) |
3300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2800 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1800 |
| Bucket capacity (m³) |
0.5 |
| Max. loading lifting height (mm) |
3300 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
20.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT15-26 |
| Dimensions (mm) |
5800*1850*2750 |
| Wheelbase (mm) |
2315 |
| wheel tread(mm) |
1500 |
| Min. ground clearance (mm) |
220 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
4800 |
| Max. speed (Km/h) |
26 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4000 |
| Digging parameters |
| Max. digging depth (mm) |
2700 |
| Dig unloading height (mm) |
2200 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
500 |
| Bucket capacity (m3) |
0.2 |
| max. digging height (mm) |
4200 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3300 |
| Max. unloading distance (mm) |
850 |
| Bucket width (mm) |
1900 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN27GBZ |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
58 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
23.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
40 |
| Hydraulic tank (L) |
40 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
450 |
| Model |
HT20-28 |
| Dimensions (mm) |
6200*1960*2800 |
| Wheelbase (mm) |
2550 |
| wheel tread(mm) |
1580 |
| Min. ground clearance (mm) |
290 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
5400 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
600 |
| Bucket capacity (m3) |
1 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
42 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2100 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 4102 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
76 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-102 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
600 |
| Model |
HT25-30 |
| Dimensions (mm) |
6500*2040*2800 |
| Wheel base (mm) |
2675 |
| Wheel tread(mm) |
1630 |
| Min. ground clearance (mm) |
280 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
6500 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
700 |
| Bucket capacity (m3) |
0.25 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2200 |
| Bucket capacity (m³) |
1.2 |
| Max. loading lifting height (mm) |
4300 |
| Max. breakout force (kN) |
42 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN48GBZ (OPTIONAL) |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
92 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-108 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
6200 |
| Model |
HT30-25 |
| Operating weight |
7200kg |
| Dimensions(L*W*H) |
7800×2300×3180mm |
| Wheel base |
2550mm |
| Min.ground clearance |
300mm |
| Bucket capacity |
1.1m3 |
| Breakout Force |
38kN |
| Loading lifting capacity |
2500kg |
| Bucket Dumping height |
3350mm |
| Bucket Dumping Distance |
062mm |
| Bucket Lifting Height |
4700mm |
| Backhoe capacity |
0.3m3 |
| Max.digging depth |
4250mm |
| Sing angle of excavator grab |
190° |
| Max. pulling force |
39kN |
| Engine |
| Model |
Yuchai |
| Rated Power |
85kw |
| No.of cylinder- Bore/Stroke |
4-108*120mm |
| Max. torque |
≥261.7N.m/1800/r/min |
| Displacement |
4.9L |
| Steering system |
| Model of steering system |
BZZ5-250 |
| Steering angle |
±36° |
| Mini turning radius |
5018mm |
| Pressure of the system |
16MPa |
| Axle |
| Manufacturer |
JINLITE |
| Main Transimmison type |
Double Reduction |
| Final reducer |
Single stage final reducer |
| T ransmission system |
| Torque converter |
JINLITE |
| Gearbox |
Fixed shaft power transmission |
| Gears |
F4/R4 |
| Max.Speed |
36km/h |
| Service Brake |
Air over Oil Caliper Brake; External Type:
Self-regulation; Self-balance |
| Parking Brake |
Manual disk brake |
| Tires |
4 |
| Size |
16/70-24 |
| Hydraulic System |
| Digging Power of Excavator Grab |
46.5kN |
| Digging Power of Dipper |
31kN |
| Model |
HT388 |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Coolingway--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine brand |
Yunnei (Optional) |
| Cooling type |
Water cooling |
| Rated power |
92 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
| Model |
HT765E-4T |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Cooling way--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine model |
YUNNEI YN48 (OPTIONAL) |
| Cooling type |
Water cooling |
| Rated power |
75 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Manufacturer |
YUNNEI (OPTIONAL) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
1. Revel in the comfort and luxury of our spacious, enlarged cabin that boasts high-end seating. The cabin features a hydraulic forward tilting function, ensuring easy maintenance access and superior convenience.
2. Designed for efficiency, the top canopy of the cabin can be conveniently removed to facilitate smooth container delivery, improving transport logistics and flexibility.
3. Experience effortless refueling with our elegantly streamlined, enlarged fuel tank, equipped with a tilting oil port for quick and easy access.
4. Benefit from the use of prestigious hydraulic components, renowned for their exceptional durability and stable performance, ensuring optimal productivity and longevity.
5. Equipped with a large radiator, this model is perfectly suited for operation in very hot climates, providing reliable performance even under extreme conditions.
6. Our advanced hydraulic steering system ensures easy maneuverability and control, enhancing user experience and operational efficiency.
With an integral frame design, the entire machine offers outstanding stability, making it ideal for demanding excavation tasks, ensuring precision and safety.
The excavating working device features a pivot center type design, ensuring light weight with high strength, delivering reliable and effective performance in various applications.
More Products
Established in 2007, Xiamen HTMA Co., Ltd. is a frontrunner in the creation of premium construction machinery, including wheel loaders, backhoe loaders, and excavators. Our sister company, Xiamen MINGYU New Energy Co., Ltd., focuses on crafting top-tier forklifts. With our headquarters nestled in the vibrant city of Xiamen and an additional manufacturing site in Shandong, we pride ourselves on offering complementary XGMA products, leveraging synergies for maximum customer satisfaction.
Strategically located in Xiamen, our head office benefits from the dynamic environment of this southeastern coastal special economic zone. This prime location attracts elite R&D talents, bolstering our capabilities in innovative design and sophisticated marketing strategies, all aimed at propelling our company to new heights.
Our factory in Shandong is meticulously situated to exploit the region's favorable natural conditions, abundant resources, efficient transportation networks, cost-effective labor, and supportive policy environment. Here, we implement integrated production processes featuring a casting welding workshop, a component warehouse, and an assembly workshop, all underpinned by rigorous debugging standards to ensure excellence.
As a seasoned leader in construction machinery manufacturing, we recognize the enduring demand and stability of the traditional diesel market. Our steadfast commitment to enhancing diesel product lines ensures improved performance, an exceptional user experience, and a robust competitive standing in this vigorous market landscape.
With the global construction machinery industry undergoing rapid evolution, new energy lithium technology is emerging as a pivotal force. Our factory, while capitalizing on the strengths of traditional diesel products, is acutely responsive to these industry shifts. We invest strategically in R&D to independently drive forward the development of state-of-the-art new energy lithium solutions.
Recognizing the transformative power of new energy lithium technology, we align ourselves with this progressive trend by strategically investing in research and development. Our dedication to innovation is reflected in our comprehensive lineup of pioneering lithium power solutions, positioning us at the forefront of industry evolution.
Our R&D division has achieved significant breakthroughs in new energy technology, particularly with our proprietary battery management system. This advancement significantly enhances battery safety, stability, and longevity. Additionally, our continuous efforts focus on optimizing battery energy density and charging speeds, delivering a more seamless and efficient user experience.
In vehicle design, we prioritize superior control and driving comfort, ensuring our new energy models set the bar for industry excellence. These vehicles are engineered to deliver unmatched handling and ride quality, reinforcing our commitment to exceptional user satisfaction.
To proactively address market dynamics, we integrate resources to boost our overall competitiveness. This strategy includes forging robust partnerships with both upstream and downstream enterprises within the industrial chain, collectively advancing the new energy lithium vehicle sector.
As we look to the future, our factory is committed to escalating R&D investments in the new energy domain. By staying attuned to market and technological advancements, we aim to introduce cutting-edge, efficient lithium power products. Concurrently, we are exploring innovative business models and collaborations to enhance service offerings to our valued users.
premium, convenient services that elevate user satisfaction.
In summary, while maintaining our traditional diesel production strengths, we are fully embracing the potential of the new energy lithium era. Our approach is characterized by openness and innovation, continually striving to enhance our market competitiveness and industry influence.
Ultimately, MINGYU is eager to explore collaborative, win-win opportunities with you. Let's embark on a journey of mutual success together!
WELCOME TO CHINA! EXPERIENCE THE HOSPITALITY OF MINGYU WITH A VISIT!
Our Advantages
Certifications
Exhibition
Packaging & Shipping
FAQ
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
){kind=link}