Product Description
| Model |
HT06-10T |
| Dimensions (mm) |
5000X1150X2800 |
| Wheel base (mm) |
1618 |
| Wheel tread(mm) |
840 |
| Min. ground clearance (mm) |
175 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
1800 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
2800 |
| Digging parameters |
| Max. digging depth (mm) |
2400 |
| Dig unloading height (mm) |
2600 |
| Max. digging radius (mm) |
2500 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
3640 |
| Maximum digging force (kN) |
10 |
| Rotary Angle of excavator (°) |
120 |
| Loading parameters |
| Max. unloading height (mm) |
2000 |
| Max. unloading distance (mm) |
1000 |
| Bucket width (mm) |
1150 |
| Bucket capacity (m³) |
0.2 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
16 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
D1105-EF02 |
| Type |
lnline Direct lnject,4 strokes |
| Rate power (KW) |
18.2 |
| Rate speed (r/min) |
3000 |
| Cylinders-inside diameter |
3 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
SPECIAL USE |
| Tire |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Model |
HT08-12 |
| Dimensions (mm) |
5100*1350*2580 |
| Wheelbase (mm) |
1910 |
| wheel tread(mm) |
1100 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2500 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3000 |
| Digging parameters |
| Max. digging depth (mm) |
1500 |
| Dig unloading height (mm) |
1500 |
| Max. digging radius (mm) |
2000 |
| Bucket width (mm) |
350 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2600 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2200 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.4 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
28 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
825-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
20 |
| Hydraulic tank (L) |
20 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3000 |
| Model |
HT08-12T |
| Dimensions (mm) |
4400*1665*2550 |
| Wheelbase (mm) |
1960 |
| wheel tread(mm) |
1130 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3200 |
| Diggingparameters |
| Max. digging depth (mm) |
1450 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2600 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2300 |
| Max. unloading distance (mm) |
750 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.3 |
| Max. loading lifting height (mm) |
2800 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN25GB |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
10-16.5 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
25 |
| Hydraulic tank (L) |
25 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT10-20 |
| Dimensions (mm) |
5500*1750*2650 |
| Wheelbase (mm) |
2070 |
| wheel tread(mm) |
1475 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
3400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3500 |
| Diggingparameters |
| Max. digging depth (mm) |
2000 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2700 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.1 |
| max. digging height (mm) |
3300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2800 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1800 |
| Bucket capacity (m³) |
0.5 |
| Max. loading lifting height (mm) |
3300 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
20.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT15-26 |
| Dimensions (mm) |
5800*1850*2750 |
| Wheelbase (mm) |
2315 |
| wheel tread(mm) |
1500 |
| Min. ground clearance (mm) |
220 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
4800 |
| Max. speed (Km/h) |
26 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4000 |
| Digging parameters |
| Max. digging depth (mm) |
2700 |
| Dig unloading height (mm) |
2200 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
500 |
| Bucket capacity (m3) |
0.2 |
| max. digging height (mm) |
4200 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3300 |
| Max. unloading distance (mm) |
850 |
| Bucket width (mm) |
1900 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN27GBZ |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
58 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
23.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
40 |
| Hydraulic tank (L) |
40 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
450 |
| Model |
HT20-28 |
| Dimensions (mm) |
6200*1960*2800 |
| Wheelbase (mm) |
2550 |
| wheel tread(mm) |
1580 |
| Min. ground clearance (mm) |
290 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
5400 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
600 |
| Bucket capacity (m3) |
1 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
42 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2100 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 4102 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
76 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-102 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
600 |
| Model |
HT25-30 |
| Dimensions (mm) |
6500*2040*2800 |
| Wheel base (mm) |
2675 |
| Wheel tread(mm) |
1630 |
| Min. ground clearance (mm) |
280 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
6500 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
700 |
| Bucket capacity (m3) |
0.25 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2200 |
| Bucket capacity (m³) |
1.2 |
| Max. loading lifting height (mm) |
4300 |
| Max. breakout force (kN) |
42 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN48GBZ (OPTIONAL) |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
92 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-108 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
6200 |
| Model |
HT30-25 |
| Operating weight |
7200kg |
| Dimensions(L*W*H) |
7800×2300×3180mm |
| Wheel base |
2550mm |
| Min.ground clearance |
300mm |
| Bucket capacity |
1.1m3 |
| Breakout Force |
38kN |
| Loading lifting capacity |
2500kg |
| Bucket Dumping height |
3350mm |
| Bucket Dumping Distance |
062mm |
| Bucket Lifting Height |
4700mm |
| Backhoe capacity |
0.3m3 |
| Max.digging depth |
4250mm |
| Sing angle of excavator grab |
190° |
| Max. pulling force |
39kN |
| Engine |
| Model |
Yuchai |
| Rated Power |
85kw |
| No.of cylinder- Bore/Stroke |
4-108*120mm |
| Max. torque |
≥261.7N.m/1800/r/min |
| Displacement |
4.9L |
| Steering system |
| Model of steering system |
BZZ5-250 |
| Steering angle |
±36° |
| Mini turning radius |
5018mm |
| Pressure of the system |
16MPa |
| Axle |
| Manufacturer |
JINLITE |
| Main Transimmison type |
Double Reduction |
| Final reducer |
Single stage final reducer |
| T ransmission system |
| Torque converter |
JINLITE |
| Gearbox |
Fixed shaft power transmission |
| Gears |
F4/R4 |
| Max.Speed |
36km/h |
| Service Brake |
Air over Oil Caliper Brake; External Type:
Self-regulation; Self-balance |
| Parking Brake |
Manual disk brake |
| Tires |
4 |
| Size |
16/70-24 |
| Hydraulic System |
| Digging Power of Excavator Grab |
46.5kN |
| Digging Power of Dipper |
31kN |
| Model |
HT388 |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Coolingway--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine brand |
Yunnei (Optional) |
| Cooling type |
Water cooling |
| Rated power |
92 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
| Model |
HT765E-4T |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Cooling way--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine model |
YUNNEI YN48 (OPTIONAL) |
| Cooling type |
Water cooling |
| Rated power |
75 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Manufacturer |
YUNNEI (OPTIONAL) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
1. Indulge in our luxurious, spacious cabin featuring a deluxe seat for unmatched comfort. The cabin's innovative hydraulic forward tilting functionality allows for seamless maintenance, enhancing user convenience.
2. The cabin's sophisticated top canopy is detachable, ensuring hassle-free container delivery and offering flexibility in transportation.
3. Our fuel tank boasts a streamlined, enlarged design with a convenient tilting oil port for easy and efficient refueling.
4. The hydraulic components are sourced from renowned brands, guaranteeing a long working life and delivering unwavering performance and reliability.
5. An expansive radiator is expertly designed to function optimally even in extremely hot climates, ensuring consistent operation.
6. Enjoy effortless maneuverability with our hydraulic steering system, crafted for easy and precise control.
The robust integral frame ensures the entire machine exhibits remarkable stability, making it exceptionally well-suited for all excavation tasks.
The excavating working device features a pivot center design, offering lightweight construction while maintaining high strength and efficiency.
More Products
Founded in 2007, Xiamen HTMA Co., Ltd. has emerged as a cornerstone in the world of construction machinery, specializing in crafting state-of-the-art equipment including wheel loaders, backhoe loaders, and excavators. Adding to our prowess, Xiamen Mingyu New Energy Co., Ltd. focuses on the production of advanced forklifts. With our headquarters strategically located in Xiamen and a sprawling branch in Shandong, we seamlessly blend our strengths with XGMA products, ensuring a harmonious balance of advantages.
Strategically nestled in Xiamen, our head office thrives in the dynamic environment of the southeast coastal special economic zone. This prime location is a magnet for top-tier R&D talents, offering a robust platform that propels our innovation in R&D, design, and marketing to new heights.
Our Shandong factory, meticulously chosen for its natural resources, strategic location, efficient traffic systems, cost-effective labor, and supportive policy environment, embodies production integration. Equipped with a casting welding workshop, an expansive component warehouse, an assembly workshop, and stringent debugging protocols, it stands as a beacon of manufacturing excellence.
As seasoned veterans in construction machinery manufacturing, we deeply understand the enduring demand for traditional diesel products. Our unwavering commitment to this line ensures persistent performance enhancements, superior user experiences, and a fortified market position amidst fierce competition.
Embracing the global shift in the construction machinery landscape, we recognize the pivotal role of new energy lithium technology. While maintaining our robust diesel product lines, we diligently channel R&D efforts into pioneering the development of new energy lithium solutions, seizing the opportunities within this transformative wave.
Simultaneously preserving our traditional strengths, we fully grasp the significance of new energy lithium products. By staying ahead of industry trends, we strategically invest in R&D to unveil a groundbreaking series of innovative lithium power products, propelling us into the future.
Our R&D team has excelled in advancing new energy technology, independently crafting a sophisticated battery management system. This innovation significantly bolsters battery safety, stability, and longevity. Concurrently, we tirelessly enhance energy density and charging speed, offering users a seamless and efficient charging experience.
Our vehicle design ethos focuses on elevating control performance and driving experience. The new energy models, distinguished by industry-leading handling and comfort, epitomize our dedication to automotive excellence.
To adeptly navigate market dynamics, we actively consolidate resources to fortify our competitive edge. Our strategic alliances with industry partners along the supply chain drive the collective advancement of the new energy lithium-electric vehicle sector.
Gazing into the future, we remain committed to amplifying our investment in new energy R&D. By aligning with market trends and technological evolution, we will unveil groundbreaking and efficient lithium power products. Concurrently, we will explore innovative business models and collaboration opportunities to deliver unparalleled service quality and convenience to our customers.
Our commitment revolves around delivering premium quality and unparalleled convenience at every touchpoint of service.
In summation, our steadfast adherence to traditional diesel excellence is complemented by a forward-thinking embrace of the new energy lithium era. We confront market challenges with openness and innovation, continually refining our competitive edge and broadening our influence.
Ultimately, Mingyu eagerly anticipates the opportunity to forge win-win partnerships with each of you!
WE WARMLY INVITE YOU TO EXPLORE CHINA AND VISIT MINGYU!
Our Advantages
Certifications
Exhibition
Packaging & Shipping
FAQ
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
){kind=link}