Product Description
| Model |
HT06-10T |
| Dimensions (mm) |
5000X1150X2800 |
| Wheel base (mm) |
1618 |
| Wheel tread(mm) |
840 |
| Min. ground clearance (mm) |
175 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
1800 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
2800 |
| Digging parameters |
| Max. digging depth (mm) |
2400 |
| Dig unloading height (mm) |
2600 |
| Max. digging radius (mm) |
2500 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
3640 |
| Maximum digging force (kN) |
10 |
| Rotary Angle of excavator (°) |
120 |
| Loading parameters |
| Max. unloading height (mm) |
2000 |
| Max. unloading distance (mm) |
1000 |
| Bucket width (mm) |
1150 |
| Bucket capacity (m³) |
0.2 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
16 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
D1105-EF02 |
| Type |
lnline Direct lnject,4 strokes |
| Rate power (KW) |
18.2 |
| Rate speed (r/min) |
3000 |
| Cylinders-inside diameter |
3 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
SPECIAL USE |
| Tire |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Model |
HT08-12 |
| Dimensions (mm) |
5100*1350*2580 |
| Wheelbase (mm) |
1910 |
| wheel tread(mm) |
1100 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2500 |
| Max. speed (Km/h) |
20 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3000 |
| Digging parameters |
| Max. digging depth (mm) |
1500 |
| Dig unloading height (mm) |
1500 |
| Max. digging radius (mm) |
2000 |
| Bucket width (mm) |
350 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2600 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2200 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.4 |
| Max. loading lifting height (mm) |
3000 |
| Max. breakout force (kN) |
28 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
825-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
20 |
| Hydraulic tank (L) |
20 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3000 |
| Model |
HT08-12T |
| Dimensions (mm) |
4400*1665*2550 |
| Wheelbase (mm) |
1960 |
| wheel tread(mm) |
1130 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
2400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3200 |
| Diggingparameters |
| Max. digging depth (mm) |
1450 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2600 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.08 |
| max. digging height (mm) |
2300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2300 |
| Max. unloading distance (mm) |
750 |
| Bucket width (mm) |
1300 |
| Bucket capacity (m³) |
0.3 |
| Max. loading lifting height (mm) |
2800 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN25GB |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
10-16.5 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
25 |
| Hydraulic tank (L) |
25 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT10-20 |
| Dimensions (mm) |
5500*1750*2650 |
| Wheelbase (mm) |
2070 |
| wheel tread(mm) |
1475 |
| Min. ground clearance (mm) |
250 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
3400 |
| Max. speed (Km/h) |
25 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
3500 |
| Diggingparameters |
| Max. digging depth (mm) |
2000 |
| Dig unloading height (mm) |
1800 |
| Max. digging radius (mm) |
2700 |
| Bucket width (mm) |
400 |
| Bucket capacity (m3) |
0.1 |
| max. digging height (mm) |
3300 |
| Maximum digging force (kN) |
25 |
| Rotary Angle of excavator (°) |
180 |
Loading parameters |
| Max. unloading height (mm) |
2800 |
| Max. unloading distance (mm) |
800 |
| Bucket width (mm) |
1800 |
| Bucket capacity (m³) |
0.5 |
| Max. loading lifting height (mm) |
3300 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 490 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
37 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL28F |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
20.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
30 |
| Hydraulic tank (L) |
30 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
3300 |
| Model |
HT15-26 |
| Dimensions (mm) |
5800*1850*2750 |
| Wheelbase (mm) |
2315 |
| wheel tread(mm) |
1500 |
| Min. ground clearance (mm) |
220 |
| performance parameters |
| System pressure (MPa) |
16 |
| Machine weight (Kg) |
4800 |
| Max. speed (Km/h) |
26 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4000 |
| Digging parameters |
| Max. digging depth (mm) |
2700 |
| Dig unloading height (mm) |
2200 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
500 |
| Bucket capacity (m3) |
0.2 |
| max. digging height (mm) |
4200 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3300 |
| Max. unloading distance (mm) |
850 |
| Bucket width (mm) |
1900 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN27GBZ |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
58 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-90 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
23.5-16 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
40 |
| Hydraulic tank (L) |
40 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
450 |
| Model |
HT20-28 |
| Dimensions (mm) |
6200*1960*2800 |
| Wheelbase (mm) |
2550 |
| wheel tread(mm) |
1580 |
| Min. ground clearance (mm) |
290 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
5400 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
600 |
| Bucket capacity (m3) |
1 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
42 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2100 |
| Bucket capacity (m³) |
0.7 |
| Max. loading lifting height (mm) |
4200 |
| Max. breakout force (kN) |
36 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei 4102 |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
76 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-102 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
600 |
| Model |
HT25-30 |
| Dimensions (mm) |
6500*2040*2800 |
| Wheel base (mm) |
2675 |
| Wheel tread(mm) |
1630 |
| Min. ground clearance (mm) |
280 |
| performance parameters |
| System pressure (MPa) |
18 |
| Machine weight (Kg) |
6500 |
| Max. speed (Km/h) |
28 |
| Max. climbing capacity (°) |
25 |
| Min. turning radius (mm) |
4500 |
| Digging parameters |
| Max. digging depth (mm) |
2600 |
| Dig unloading height (mm) |
2300 |
| Max. digging radius (mm) |
4600 |
| Bucket width (mm) |
700 |
| Bucket capacity (m3) |
0.25 |
| max. digging height (mm) |
4300 |
| Maximum digging force (kN) |
28 |
| Rotary Angle of excavator (°) |
180 |
| Loading parameters |
| Max. unloading height (mm) |
3500 |
| Max. unloading distance (mm) |
900 |
| Bucket width (mm) |
2200 |
| Bucket capacity (m³) |
1.2 |
| Max. loading lifting height (mm) |
4300 |
| Max. breakout force (kN) |
42 |
| Forward shovel action time (S) |
12 |
| Engine |
| Model |
Yunnei YN48GBZ (OPTIONAL) |
| Type |
Turbocharged, 4 strokes |
| Rate power (KW) |
92 |
| Rate speed (r/min) |
2400 |
| Cylinders-inside diameter |
4-108 |
| Transmission system |
| Gearbox |
Fixed shaft power shift |
| Number of gear |
2 first/ 2 after |
| Hydraulic torque converter |
ZL29A |
| Steering system |
| Type |
Hinged full hydraulic steering |
| Steering Angle (°) |
33 |
| Bridge |
| Type |
Hub reduction |
| Tire |
| Specifications |
16/70-20 |
| Front wheel pressure (kPa) |
250 |
| Rear wheel pressure (kPa) |
250 |
| Crane brake |
Oil brake drum brake |
| The parking brake |
Manul |
| Oil amount |
| Fuel tank (L) |
50 |
| Hydraulic tank (L) |
50 |
| Other |
| Drive type |
Four-wheel drive |
| Variable speed type |
Hydraulic variable speed |
| Braking distance (mm) |
6200 |
| Model |
HT30-25 |
| Operating weight |
7200kg |
| Dimensions(L*W*H) |
7800×2300×3180mm |
| Wheel base |
2550mm |
| Min.ground clearance |
300mm |
| Bucket capacity |
1.1m3 |
| Breakout Force |
38kN |
| Loading lifting capacity |
2500kg |
| Bucket Dumping height |
3350mm |
| Bucket Dumping Distance |
062mm |
| Bucket Lifting Height |
4700mm |
| Backhoe capacity |
0.3m3 |
| Max.digging depth |
4250mm |
| Sing angle of excavator grab |
190° |
| Max. pulling force |
39kN |
| Engine |
| Model |
Yuchai |
| Rated Power |
85kw |
| No.of cylinder- Bore/Stroke |
4-108*120mm |
| Max. torque |
≥261.7N.m/1800/r/min |
| Displacement |
4.9L |
| Steering system |
| Model of steering system |
BZZ5-250 |
| Steering angle |
±36° |
| Mini turning radius |
5018mm |
| Pressure of the system |
16MPa |
| Axle |
| Manufacturer |
JINLITE |
| Main Transimmison type |
Double Reduction |
| Final reducer |
Single stage final reducer |
| T ransmission system |
| Torque converter |
JINLITE |
| Gearbox |
Fixed shaft power transmission |
| Gears |
F4/R4 |
| Max.Speed |
36km/h |
| Service Brake |
Air over Oil Caliper Brake; External Type:
Self-regulation; Self-balance |
| Parking Brake |
Manual disk brake |
| Tires |
4 |
| Size |
16/70-24 |
| Hydraulic System |
| Digging Power of Excavator Grab |
46.5kN |
| Digging Power of Dipper |
31kN |
| Model |
HT388 |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Coolingway--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine brand |
Yunnei (Optional) |
| Cooling type |
Water cooling |
| Rated power |
92 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
| Model |
HT765E-4T |
| Total length bucket at ground |
6450±80mm |
| Total width |
2650±20mm |
| Bucket width |
2620mm |
| Total height cab in top |
3120±10mm |
| Total height digging boom top |
3940±20mm |
| Wheel base |
2335+10 mm |
| Wheel tread |
2139 10mm |
| Hydraulic torque |
Model---315 |
| convertor |
Cooling way--Pressured oil circle |
| Gearbox |
Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles |
Model---WZL100 |
| Gear shift |
Forward 4 Backwar 4 |
| Tyres model |
16.9-28 |
| Rated digging bucket capacity |
0.3m3 |
| Max.Digging radius |
3820±20 mm |
| Max.Digging depth |
5345±20mm |
| Max.Loading height |
3740±20mm |
| Max.Digging force |
5100kgf |
| Max.Digging height |
5470 ±20mm |
| Lifting forceat Max.Digging radius |
1220kg |
| Max. Digging depth with arm extended (telescopic arm) |
4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) |
6680±20mm |
| Working pump displacement |
63ml/r |
| Working pump pressure |
20Mpa |
| Diverter model |
BZZ5-250 |
| Rod diameter (mm) |
68-70 |
| Working pressure (Mpa) |
11-14 |
| lmpact frequency |
500-900 |
| Flow scope( Umin) |
25-45 |
| kinetic energy (KN) |
49 |
| Engine model |
YUNNEI YN48 (OPTIONAL) |
| Cooling type |
Water cooling |
| Rated power |
75 (kW) |
| Displacement |
4.8(L) |
| Rated speed |
2200(r/min) |
| Max.Torque |
400(N.M) |
| Manufacturer |
YUNNEI (OPTIONAL) |
| Hydraulic oil tank |
125 |
| Fuel tank |
125 |
1. Revel in the unparalleled luxury of a spacious, opulent cabin, featuring a plush seat that epitomizes comfort. The cabin is equipped with a hydraulic forward tilting function, ensuring effortless maintenance and unparalleled ease of access.
2. Ingeniously designed, the cabin's top canopy can be effortlessly removed, facilitating seamless container delivery and transport efficiency.
3. Boasting a streamlined, enlarged fuel tank with a convenient tilting oil port, this design innovation ensures refueling is both quick and hassle-free.
4. Our hydraulic components are crafted by renowned brands, ensuring extended longevity and consistently stable performance, setting a benchmark in reliability.
5. Equipped with a high-capacity radiator, this machine is optimized for operation in extremely hot environments, ensuring peak performance under the sun's relentless heat.
6. Experience the precision and ease of operation with the advanced hydraulic steering system, designed for intuitive control and enhanced maneuverability.
Built with an integral frame, the machine offers exceptional stability, making it impeccably suited for demanding excavation tasks with utmost reliability.
This excavation apparatus boasts a pivot center type design, combining lightweight agility with high strength, delivering superior performance and durability.
More Products
Established in 2007, Xiamen HTMA Co., Ltd. has carved a niche in the realm of construction machinery, excelling in the production of wheel loaders, backhoe loaders, and excavators. Our affiliated company, Xiamen Mingyu New Energy Co., Ltd., specializes in crafting forklifts with precision and expertise. Strategically headquartered in Xiamen, with a branched factory in Shandong, we also proudly distribute XGMA products, creating a synergy that blends complementary advantages.
Strategically situated in Xiamen, our head office leverages the benefits of the Southeast Coastal Special Economic Zone. This prime location attracts top-tier R&D talent, providing an ideal platform for innovative design, research, and marketing, fueling our company's growth.
Our Shandong factory is meticulously positioned, taking into account natural conditions, resource distribution, traffic accessibility, labor costs, and the policy environment. Here, we embrace production integration with facilities that include a casting welding workshop, a well-stocked component warehouse, and an assembly workshop, all operating under stringent debugging standards.
As a seasoned construction machinery manufacturer, we understand the robustness and demand of the traditional diesel market. We steadfastly maintain our diesel product line, continuously enhancing product performance and user experience to secure a dominant position in the competitive market landscape.
With the construction machinery industry undergoing a transformation, new energy lithium technology is at the forefront of this evolution. While retaining our traditional diesel strengths, we keenly observe market dynamics and invest strategically in R&D to pioneer new energy lithium products.
Balancing tradition with innovation, our factory recognizes the pivotal role of new energy lithium products. We align with contemporary trends, strategically advancing in the new energy sector, bolstering our R&D efforts, and unveiling a suite of groundbreaking new energy lithium power solutions.
Our R&D team has achieved groundbreaking advancements in new energy technology. By developing an advanced battery management system, we significantly enhance battery safety, stability, and longevity. Concurrently, we focus on optimizing energy density and charging speed to deliver a seamless, efficient charging experience to our users.
In vehicle design, we prioritize enhancing control performance and driving pleasure. Our new energy models set industry benchmarks in handling and comfort, ensuring a superior driving experience.
To adeptly navigate market shifts, we integrate resources and elevate our competitive edge. We've forged strategic alliances with key players across the industrial chain, collaboratively advancing the new energy lithium-electric vehicle sector.
Envisioning the future, we are committed to ramping up investment and innovation in new energy. By staying abreast of market trends and technological advancements, we aim to continually launch cutting-edge, efficient new energy lithium power products. Simultaneously, we actively seek out novel business models and collaborative methods to offer enhanced value to our users.
Our goal is to provide high-quality and seamless services.
In summary, while preserving the strengths of our traditional diesel production, we wholeheartedly embrace the new energy lithium era. We aim to tackle market challenges with an open, innovative mindset, continuously honing our competitiveness and broadening our impact.
In conclusion, MINGYU eagerly anticipates the chance to collaborate and achieve mutually beneficial successes with all of you!
WE WELCOME YOU TO EXPLORE CHINA AND VISIT MINGYU!
Our Advantages
Certifications
Exhibition
Packaging & Shipping
FAQ
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
){kind=link}